ARB BONDI DELUXE BUMPER

Inspired by the popular classic ARB TJ Wrangler bumper styling, ARB has designed a completely new look bumper to suit the JL. Ruggedness is ensured by the new single piece, press formed centre pan perfectly complemented by a bash plate underpanel. Further protecting the vulnerable engine components is a low slung, forward facing 76.1mm top tube.

The new Bondi Deluxe Winch bar is recovery ready with two highly visible red chassis mounted, 8T rated recovery points and centrally located high lift jacking points.

PROTECTION AND STYLING CHARACTERISTICS

  • Vehicle specific design to complement the Jeep Wrangler JL
  • Durable steel construction for maximum protection
  • Single-piece press formed centre pan
  • Bash plate under panel included for added protection finished in vintage silver
  • Twin high lift jack points in the bar perfect for use with ARB Jack or a mechanical jack
  • Two aerial or driving light brackets located on the top of the centre tube
  • Will accommodate Warn, Bushranger and Smittybilt low mount model electric winches up to 10,000lbs
  • Provision to accommodate ARB Intensity LED’s and a range of Bushranger and IPF lights
  • Provision for OE Fog Lights. Refer fog light section below for additional parts required Brackets provided to accept either OE halogen or OE LED fog lights
  • Dual chassis-mounted recovery points, powder-coated red for maximum visibility
  • Bumper adds approximately 34mm to the overall length of the vehicle
  • Approximate weight of the bumper, chassis mounts and fitting kit is 143lbs
  • Approximately 42lbs is removed from the vehicle for fitment of the bar
  • Zinc rich primer for additional corrosion resistance, followed by a textured Integrit black powder coat finish
  • Chassis mounts manufactured with 5mm sheet steel
  • Separate winch cradle manufactured from a combination of 4mm and 5mm sheet steel
  • 76.1mm forward-facing top tube
  • Wings and pan manufactured from 3mm sheet steel including press forms and multi folds for added structural integrity
  • Wings designed to suit the flares of Rubicon models will also suit Sport and Sahara models with Rubicon or aftermarket front flares fitted
  • Uprights manufactured from laser-cut 4mm sheet steel
  • Fog light brackets provided to accept either OE halogen fog lights or OE LED fog lights

Bondi Full-Size Bumper Add

Jeep Wrangler JL 2018 - Present, Rubicon
Part No
3450460
MSRP (USD)
$1150.00

Features

JL Stubby.303

Fog Lights

Perfect for driving in inclement weather, these fog lights provide a broad spread of light to illuminate the road ahead. Pressed fog light apertures for factory LED fog lights.

Fog Lights

Perfect for driving in inclement weather, these fog lights provide a broad spread of light to illuminate the road ahead. Pressed fog light apertures for factory LED fog lights.

Jacking Points

Eliminating the need for a mounting bracket, these high-lift jacking points are integrated into the design of Summit Bumpers.

Recovery Points

Integrated recovery points that are certified to carry over 8 tonnes. This accessory is expertly engineered and finished in ARB's signature red.

Trail Light Panels

Removable trail light panels to allow flexibility with your JL. **Mounts not included with this bar

Recessed Fair Lead Mount

Increased depth recessed fair lead mount to add style and strength to this bar.

Bash Plate

ARB have included a pressed steel bash plate to reduce any visible marking to the bar itself.

Winch Cradle

For all the recovery activities this vehicle will undertake, there is a 12,000lb winch cradle integrated.

Center Pan

The center pan has been pressed, and has been fabricated as a single piece.

Mounting Holes

Mounting holes included for ARB's LED lightbar to provide security for this product when mounted on this bar.

Practical Design

An expertly engineered design for the Jeep JL Wrangler with a 3" center frame, including light mounts.

top